Skip to content

Controllers

A controller turns the values of an input (a leader, a hand-held device, a policy) into follower targets. The settings come in three parts.

Setting Role Examples
inputs reads the device the operator moves Rakuda-mini (rakuda_mini), Pika Sense (pika_sense)
controllers turns the input into follower targets; holds the start condition (alignment), speed limits and the input deadline joint, pose_ik, policy, parts
control the control law applied to a device's motors (the leader's spring, gravity compensation, …), run by the follower or leader node itself spring, gravity_comp, position
flowchart LR
  I["input<br/>inputs"] --> C["controller<br/>controllers"]
  P["policy"] --> C
  C -- "targets" --> F["follower<br/>followers"]
  F -- "state" --> C
  L["control law<br/>control"] -.-> I
  L -.-> F

Types

Controller type Input Status
Leader joint a leader with the same joints Hardware-verified
Policy policy a learned policy (and a joint leader for interventions) Hardware-verified
Pika Sense and IK pose_ik (parts to split it per arm) the pose of a hand-held device In development

By robot

Robot Leader Policy Policy with interventions Pika Sense and IK
Rakuda2 Hardware-verified Hardware-verified Hardware-verified In development
PiPER + Pika Gripper — In development — In development

The table that also covers sensors and kinds of policies is the Support matrix. The controller keys are listed in Controllers configuration.